How To Measure Window Blind Size

Introduction

Find the runway depth for your chosen blind using our handy table. Make a note of this before y'all start measuring.

Cull from the iii fitting options. and then measure your bay windows with a metallic record measure, using the instructions for your chosen option.

If your side blinds are going to stitch to a wall, deduct 5mm from your concluding measurements.

Blinds Blazon	Depth (MM)
Aluminium Blind	35mm
Roman Blind	40mm
Pleated Bullheaded	40mm
Roller Blind	50mm
Wooden Bullheaded (25mm slats)	60mm
Wooden Blind (27mm slats)	60mm
Wooden Bullheaded (35mm slats)	60mm

Blinds Type	Depth (MM)
Roller Blind (Face Fix)	70mm
Vertical Bullheaded (Height Fix)	73mm
Vertical Blind (Confront Gear up)	73mm
Wooden Blind (50mm slats)	80mm
Wooden Blind (64mm slats)	80mm
Vertical Blind (Medium Confront Fix)	91mm
Vertical Bullheaded (Large Face up Set)	107mm

Option 1

For this selection, the front blind fits from corner to corner, with the side blinds installed up against the front blind. For your front blinds, measure the full width of the bay then subtract 15mm and cull 'verbal fitting' when ordering.

Measure the width of each side blind seperately in the same way then deduct the track depth from each to get your final measurements. The side blinds should and so be ordered as 'verbal fitting'.

Handles, openers and vents
If you have any obstructions protruding from the front end window, measure how far they stick out past the window.

Option 2

To make sure this is suitable for your window, bank check the size of your window frame, going from the corner of the bay to the beginning of the glass frame pane 1 the front end and then the sides. If any of these measurements are smaller and then the rail depth of your bullheaded so your blinds volition not cover the drinking glass and there will be noticeable gaps. In this instance, we recommend you consider another fitting option.

In this mode all 3 blinds meet in the corner of the bay without overlapping, creating an empty foursquare infinite in the corners. Measuring is straight forwards, just measure out all three sections directly into the corners. Deduct the rail depth from the measurement for each of the side blinds and deduct double the rails depth from the measurement for the front blind. Finally order all as 'exact plumbing equipment' blinds.

Handles, openers and vents
Obstructions on the forepart of the window will reduce the width of the side blinds. Measure how far the obstructions protrudes by the window frame and deduct that from the side blind measurements.

Obstructions on the side windows will reduce the width of the front blind. Mensurate how far the obstruction protrudes past the side window frame and deduct that from the forepart blinds measurements.

Pick 3

If your side windows are too pocket-sized for the other options, then this volition exist the nearly suitable pick for you lot. In this selection, the side blinds continue into the corners and the front blind sits between them. Measure out the sides into the corner then decrease 15mm, use this measurement to social club both as 'verbal fit'. Measure out across the front so deduct double the rail depth and order as 'exact plumbing fixtures'.

Handles, openers and vents
Obstructions on the side windows volition reduce the width of the front end bullheaded. Measure how far the obstruction protrudes by the side window frame and deduct that from the front blinds measurements.

Important

Always cheque the widths in three places as yous would for a regular refular recessed window. Bay windows are prone to motion and you may observe that the width vary even if at first glance the windows expect square. It is always the smallest of the three measurements that you should use.

Drop

This is the aforementioned for all three options. Information technology volition simply be from the point where the blind is beingness mounted down to the window sill. Recall that the head runway is included in the driblet and that you will demand a flat space of at least 50mm (5cm) to mount the brackets securely.

Source: https://www.blindsdirect.co.uk/measuring-blinds

Posted by: johnsonhiseek1938.blogspot.com